Description
SUPPORT TREATMENT:
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
Apply a possible layer of water-based fixing insulation.
Old plasters:
Clean the surfaces by removing any loose parts.
Dirt and molds must be removed with special cleaning and sanitizing products from the wall. Old paints can be removed.
Apply a possible layer of water-based fixing insulation.
COLORING:
Add to the bases the amount of coloring paste indicated by the formula of the desired color. Mix with the spatula or the gyroscopic mixer for a maximum of 30 seconds, in order not to alter the chemical-physical characteristics of the product and not to alter the decorative effect.
APPLICATION PROCEDURE:
It needs to be applied with a brush, apply the base paint and wait for it to dry perfectly (overnight).
Mix manually to homogenize the product with a spatula, taking care not to damage the chemical-physical system of the product.
Using a “splitter for grounds and glazes”, distribute the product in crossed brushes over an area of several square meters. After a few minutes, gently smooth the product using a flexible plastic spatula.
The optimal application conditions are temperature T = 15-30°C and relative humidity lower than RH <70%. Do not apply in unfavorable environmental conditions.
TECHNICAL SPECIFICATIONS:
STORIA WP
• Recommended coverage: 7-8 m2/L
• Drying at T = 23 ± 2 ° C; RH = 50 ± 5%: without touching: 5-6 hours; Depth: 24 hours
• Specific gravity: 1.05 ± 0.05 g/ml
• Brookfield viscosity: 8000-20000 cPs
• pH: 7.2-8.0
• VOC: 50 g/L
STORIA ORO
• Recommended coverage: 7-8 m2/L
• Drying at T = 23 ± 2 ° C; RH = 50 ± 5%: without touching: 5-6 hours; Depth: 24 hours
• Specific gravity: 1.05 ± 0.05 g/ml
• Brookfield viscosity: 8000-20000 cPs
• pH: 7.2-8.0
• VOC: 50 g/L
STORIA ARGENTO
• Recommended coverage: 7-8 m2/L
• Drying at T = 23 ± 2 ° C; RH = 50 ± 5%: without touching: 5-6 hours; Depth: 24 hours
• Specific gravity: 1.10 ± 0.05 g/ml
• Brookfield viscosity: 8000-20000 cPs
• pH: 7.2-8.0
• VOC: 50 g/L
The tools must be washed immediately after use with water.
The product can be over-applied with traditional water-based construction products.
HANDLING – STABILITY:
If stored in a dry place, at room temperature and in the original well-closed containers, does not present stability problems. The maximum storage time is 18 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
The product does not withstand frost.
Storage: in environments with temperatures between 5 and 30°C.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required
Reviews
There are no reviews yet.