£70.00 – £240.00 (VAT inclusive)
FREE DELIVERY for orders OVER £500! The usual delivery charge per order is £10!
To be able to add to cart, first choose the quantity and color or type of product!
Place the mouse cursor over the image of the color or type of product and you will be shown its name.
In Stock
MATERICO decorative plaster is a water-based decorative finish with which relief effects can be obtained. MATERICO is easy to apply and is intended for use on interior walls. The decorative effect is obtained by applying the product in a single layer.
MATERICO is available in a white base, which can be colored, through a simple tinting system, to obtain a wide range of colors in different shades or with the overlap of VELATURIA.
MATERICO complies with legislation 2004/42/EC on VOC emissions.
MATERICO decorative plaster is a water-based finish with which relief effects can be obtained, by applying the product in a single layer.
PREPARATION OF THE SUPPORT:
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
Apply a possible layer of water-based fixing insulation (Fondo Ruvido).
Old plasters:
Clean the surfaces by removing any loose parts.
Dirt and molds must be removed with special cleaning and sanitizing products for the wall.
Old paints can be removed.
Apply a possible layer of water-based fixing insulation (Fondo Ruvido).
APPLICATION PROCEDURE:
On substrates treated as described above.
Apply one or two layers of Fondo Ruvido.
Apply a layer of MATERICO with a spatula until the desired decorative effect is obtained.
Apply the VELATURA product on small portions of the wall of approximately 1 m2 to color the surface.
Climate conditions:
Temperature +5 / + 35°C;
The relative humidity does not exceed 75%.
Drying at T = 23 ± 2°C and RH = 50 ± 5%: touch 30-60 minutes; in depth 14-24 hours.
Dilution: product ready for use (if necessary, dilute with small amounts of water)
Tools: metal spatula.
Tools must be washed with water immediately after use.
PHYSICAL-CHEMICAL PROPERTIES:
pH: 7.0-9.0
Specific gravity: 1.86 ± 0.05 g/ml
Viscosity: 80000-120000 cps
Yield: 1 kg/m2 (may vary depending on the application method)
VOC: 50 gr/l
HANDLING – STABILITY:
Storage: in environments with temperatures between 5 and 35°C.
The finished product, if it is stored in a dry place, at room temperature and in sealed containers, does not present stability problems. The maximum recommended storage time is 12 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
THE PRODUCT DOES NOT WITHSTAND FREEZING.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.
| Quantity | 6 kg, 24 kg |
|---|---|
| Type | Materico Decorative Plaster, Materico XT Decorative Plaster with Quarz |
© Ferrara Design UK 2023. Created with BusinessLike-Online
All rights reserved
Reviews
There are no reviews yet.