Description
YIELD: 6-10 m²/lt;
Before applying this decorative paint, we recommend using Primer Fondo Liscio.
PREPARATION OF THE SUPPORT:
ILLUSIONE can be applied to different types of surfaces.
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
If necessary, reinforce with appropriate products.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Old plasters:
If the old paint is not perfectly anchored, it must be removed mechanically. Any defects must be filled.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
ILLUSIONE allows application without the use of a base paint. However, it is recommended to standardize the absorption of the surface. To obtain an optimal result, it is recommended to apply on smooth surfaces.
APPLICATION PROCEDURE:
Apply a layer of ILLUSION with a flat brush or other similar tool, making the movement according to the design you want to get (cloudy, marble effect, antiqued, spatula). When the product is almost completely dry, go over the surface with the plastic spatula to modulate the chiaroscuro intensity. During the drying phase, the product tends to develop color.
For a wood effect, use the corresponding pad.
• Dilution: none. Product ready to use
• Specific weight: 1.43 ± 0.05 gr/ml
• Yield (indicative): 4-6 m2/l depending on the roughness of the surface.
• TVOC: class A+
• Climatic conditions of application:
• T = + 5 / + 30 ° C; RH not higher than 75%.
• Tools: brush, plastic spatula, pad (only for wood effect)
• Tools must be washed with water immediately after use.
IMPORTANT!
Mix by hand to avoid damaging the components. Avoid using mechanical stirring and/or mixing systems.
PHYSICAL-CHEMICAL PROPERTIES:
• RECOMMENDED YIELD: 4-5 m2 / lt
• VISCOSITY: 4000-8000 cps
• SPECIFIC GRAVITY: 1.09 ± 0.05 g/ml
• PH: 7-9
• VOC: 50 gr/l
HANDLING – STABILITY:
Storage: in environments with temperatures between 5 and 35°C.
ILUZIE is stored in a dry place, at room temperature and in sealed containers, it does not present stability problems. The maximum recommended storage time is 12 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
The product does not withstand freezing.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.
Reviews
There are no reviews yet.