DOLCEVITA decorative paint, Ferrara Design, water-based, for interior,

Description

PREPARATION OF THE SUPPORT:

DOLCEVITA can be applied to surfaces of different natures after their treatment.
The substrate must be smooth, preferably matte.

New plasters:

Make sure the plaster is dry and hardened properly (at least four weeks).
If necessary, reinforce with suitable products.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.

Old plasters:

If the old paint is not perfectly anchored, it must be removed mechanically.
Any defects must be filled.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.

APPLICATION PROCEDURE:

DOLCEVITA is ready to use and can be applied with two hands. Shake it before use. To obtain the velvety decorative effect, it is recommended to proceed as follows:
– apply the first layer with a synthetic roller (such as for enamel) or with a brush, mixing the product;
– wait for the first layer to dry completely;
– apply the second layer with a brush, applying on portions of the wall of 1-2 m², continuously crossing the stretching direction to orient the pigments and create the surface design;
– the characteristic velvety effect will be obtained by smoothing the product with a plastic trowel, after a few minutes and in any case before it is completely dry.

It is recommended to use the trowel with movements in several directions.

• Tools: synthetic roller, brush, plastic trowel;
• Dilution: none;
• Climatic conditions: Temperature +5 / + 35°C;
• The relative humidity does not exceed 75%.
• Drying at T = 23 ± 2 ° C and RH = 50 ± 5%: without touching 3-4 hours; in-depth 14-24 hours;
• Tools must be washed with water immediately after use.

PHYSICAL-CHEMICAL PROPERTIES:

• RECOMMENDED YIELD: 8-10 m2 / lt
• VISCOSITY: 6000-11000 cps
• SPECIFIC GRAVITY: 1.07 ± 0.05 g/ml
• PH: 7-8
• VOC: 50 gr/l

HANDLING – STABILITY:

Storage: in environments with temperatures between 5 and 35°C.
The finished product, if it is stored in a dry place, at room temperature and in sealed containers, does not present stability problems. The maximum recommended storage time is 12 months. Regarding the evaluation of toxicological data, please consult the safety data sheet.
The product does not withstand freezing.

Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.