Description
Aurora is a decorative paint for interior applications, based on special fillers that reflect light.
PREPARATION OF THE SUPPORT:
AURORA can be applied to surfaces of different nature after their treatment.
New plasters:
Make sure the plaster is dry and hardened properly (at least four weeks).
If necessary, reinforce with suitable products.
In the presence of mould or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.
Old plasters:
If the old paint is not perfectly anchored, it must be removed mechanically.
Any defects must be filled.
In the presence of mold or algae, treat the surface with appropriate biocides.
Apply a possible layer of water-based fixing insulation.
Apply one or two coats of washable quartz paint.
APPLICATION PROCEDURE:
AURORA is ready to use and can be applied with a brush in one layer. Shake it before use.
• Tools: brush
• Dilution: none (ready to use product).
• Climatic conditions: Temperature +5 / + 35°C;
• Relative humidity does not exceed 75%;
• Drying at T = 23 ± 2 ° C and RH = 50 ± 5%: without touching 3-4 hours; in depth 14-24 hours;
• Tools must be washed with water immediately after use.
CHEMICAL-PHYSICAL PROPERTIES:
• Yield: 10-12 m²/l;
• Viscosity: 6000-12000 cPs;
• Specific weight: 1.18-1.28 gr/ml;
• pH: 7-9;
• VOC: 20 gr/l.
HANDLING – STABILITY:
AURORA does not present stability problems when it is stored in a dry place at room temperature and in the original sales packaging. The product is stable for at least 12 months.
Regarding the evaluation of toxicological data, please consult the safety data sheet. The product does not withstand freezing.
Liability note:
The advice and indications in this technical sheet are given based on our experience, but we cannot engage in responsibility.
Our technical service is available to provide any additional information required.
Reviews
There are no reviews yet.