EVO3 SYSTEM IS DESIGNED TO REDUCE HEAT ABSORPTION PRODUCED WITH LESS HEATING IN HOMES.
The solar radiation that reaches the earth is divided into three main components:
1. Ultraviolet radiation.
2. Visible radiation.
3. Infrared radiation.
infrared radiation hits the walls of the houses causing, especially during the summer, heating.
This heating is transmitted from the walls inside the house and creates the unpleasant sensation of excessive heat.
EVO3 The system is designed to reduce the absorption of heat produced, with less heating in homes. The system has been formulated to reflect part of the wavelengths in the infrared range thus reducing the absorption that raises the surface temperature of the walls and generates heat inside
The photos, taken with the IR camera on two surfaces: the one on the left is covered with a traditional thick yellow decorative and on the right EVO3 decorative system
Temperature trend graph over time. Comparison between traditional decorative and EVO3 on dark colors (grey).
The photos, taken with the IR camera on two surfaces: the one on the left is covered with a traditional thick gray decorative, the one on the right with EVO3 decorative system.
Temperature trend graph over time. Comparison between traditional decorative and EVO3 on light colors (yellow)
It can be said that the EVO3 system has the same thermal performance in all 30 colors (in two different decorative effects: the effect on the brush-and-brush effect / spatula) in which it is offered
FLEXIBILITY AND RESISTANCE
Elasticity is the ability of the paint to deform as a result of external forces, when the decorations remain in their original position without producing cracks (cracks)
The elasticity of EVO3 is given by the special membrane that is formed. The polymer is able to maintain the correct balance between the post and the stem without breaking (crack).
OUTDOOR RESISTANCE
The decorations constitute the first layer of the facade, i.e. in direct contact with the external environment. The degree of efficiency of this protection depends on the “equipment” of the entire building.
EVO3 has high water repellency, or repels water in liquid form, and at the same time allows water to escape in the form of steam, which makes the wall “breathe”
EVO3 provides excellent resistance to UV radiation and stresses caused by freeze-thaw cycles that can make the construction surface more fragile.
EVO3 has been formulated to ensure adequate resistance to fungi, mold and algae. The product has passed the test for resistance to fungal strains.
STEP 1
Apply the EVO3 Primer with a brush or roller.
STEP 2
Apply the EVO3 Fondo with a roller
STEP 3
With a metal spatula, gently crush the surface of the product until you get the desired effect.
STEP 4
To get the effect of Smooth finishes: Apply EVO3 Finitura
STEP 4 / BIS
To achieve the effect of Rough finishes: After applying EVO3 Finitura
© Ferrara Design UK 2023. Created with BusinessLike-Online
All rights reserved
